Positive Displacement Flowmeter

Model: MP050
Stock Code: 22412
Manufacturer: TRIMEC
Category: Metering Pumps

Watch product video

Print page

Data Sheet (.PDF)

Product overview

The Multipulse range of positive displacement flowmeters offer a high level of accuracy and repeatability.

These precision flowmeters are used for flow rate measurement in flow monitoring and control applications and for totalising in dispensing and batching.

Multipulse flowmeters are suitable for use with a wide range of clean liquids including viscous lubricants, chemicals, food bases and non-conductive low viscosity solvents either pumped or gravity fed.

Make: Trimec

Model: MP050S223.1

Body Material: SS316

Piston Material: PEEK

Partition Material: PVDF

O-ring Material: Viton

Temp Limits: -40 degrees C to +60 degrees C

Process Connection: BSP Threaded

Uses: Alcohols, acetic acid, caustic soda, ethanol, fuels, grease, glucose, ink, insecticides, latex emulsions, liquid sugar, margarine, mayonnaise, molasses, resin, tallow, urethane, water, xylene & liquid yeast.

Liquid enters into a precision machined chamber which contains an oscillating piston. The position of the piston divides the chamber into compartments containing an exact volume. The liquid pressure causes the piston to oscillate and rotate its centre hub. The movements of the hub are sensed through the meter wall by a series of magnets. Each revolution of the piston hub is equivalent to a fixed volume of liquid, which is indicated as flow by an indicator or totaliser. Close clearances between the piston and the chamber ensure minimum slippage of the liquid for highly accurate and repeatable measurement of each volume cycle.

Features

Insensitive to mounting orientation.

Measure low & high viscosity liquids.

Has only one moving part (oscillating piston).

Has no stagnate chambers to accumulate contaminants or stale products.

Certified Exd hazardous area versions in all sizes.

No need for flow conditioning (straight pipe run etc).

Limited number of spares parts needed to support the product.

Extremely compact and comparatively lightweight.

Applications

Applications include alcohols, acetic acid, caustic soda, ethanol, fuels, grease, glucose, ink, insecticides, latex emulsions, liquid sugar, margarine, mayonnaise, molasses, resin, tallow, urethane, water, xylene & liquid yeast.